...

CUAV CAN PMU Power Detection Unit for Unmanned Systems Hardware

CUAV CAN PMU Power Detection Unit for Unmanned Systems Hardware

 

CUAV CAN PMU Power Module Features:

1–0.05V 0.1A accuracy

2–5V/5A regulated output

3–Maximum support 62V voltage input, 110A current measurement

4–Self-developed ITT algorithm

$119.00

Out of stock

Payment Methods:

Out of stock

CAN PMU Power Management Module Brief:

The CAN PMU is a power management unit module designed for unmanned systems. It features an integrated STM32F4 processor running the CUAV ITT algorithm, enabling real-time, accurate measurement of system voltage and current. It supports input voltages of 6–62V and currents up to 110A, while providing a 5.4V/5A output (5A continuous; 8A peak for 120s) to power the controller. Utilizing CAN bus communication and supporting the standard DroneCAN protocol, each unit undergoes factory calibration to ensure consistent performance and high accuracy.

CAN PMU Power Management Module Feature:

  • 0.05V 0.1A accuracy
  • 5V / 5A regulated output
  • Maximum support 62 V voltage input, 110 A current measurement
  • Self-developed ITT algorithm

CAN PMU Power Management Module Specification:

Main Parameter
Processor STM32F412(32 Bit Arm Cortex -M4, 100MHz, 512KB FLASH, 256KB RAM)
Voltage Input 6 ~ 62V(2 ~ 15S)
Max Current 110A
Voltage Accuracy ±0.05V
Current Accuracy ±0.1A
Resolution 0.01A/V
Max Output Power 6000W/90s
Max Stable Power 5000W
Power Port Output 5.4V/5A
Protocol DroneCAN
Operating Temp -20 ~ 100 ℃
Firmware Upgrade Support
Calibration Factory calibration
Interface Type IN/OUT: XT90(Cable)/Amass 8.0(Module)
Power: 5025850670
CAN: GHR-04V-S
Size 46.5 × 38.5 × 22.5mm
Weight 76g

Digital communication safe and reliable

The CAN PMU uses the standard UAVCAN digital communication protocol, and all information is transmitted digitally, avoiding the errors caused by the traditional ADC being easily attenuated and interfered with.

Accurate power consumption estimate

Internally, it can be sampled in real time over 100Hz, and the power consumption/instantaneous power consumption can be calculated in real time. Accurate power consumption information can be transmitted to the flight control for safer and controllable flight missions.

Low EMl, 5A high current regulated output

Built-in voltage regulator with LT8645S chip, supports 62V input,5.4V/8A synchronous buck regulator, with ultra-low EMI and EMC, up to 95% conversion efficiency to meet the industry’s Unmanned Systems controller peripherals, and large application needs.

*Maximum instantaneous output current 8A.maximumcontinuous output current 5A

CUAV independently develops ITT algorithms to assist precision measurement

CAN PMU uses the self-developed ITT (impedance temperature track) algorithm to compensate for the measurement error caused by different operating temperature impedance changes, enabling CAN PMU to maintain consistent precision voltage and current measurements at various operating temperatures.

CUA independently develops iTT algorithms to assist high-precision measurement

Platform Compliance and End-User Commitment Statement

To jointly comply with international trade regulations and Chinese law, as a user purchasing products on this platform, you must understand and agree to abide by the following provisions:

Purchase and Use commitment

You commit that all products purchased through this platform will be used for legal and compliant civilian purposes. You shall not use the products for any military purposes, prohibited scenarios, or any activities related to weapons or weapons of mass destruction.

Export and Resale Restrictions

1. Do not directly or indirectly export or transship products to any country/region subject to sanctions under Chinese law or international regulations.
2. Do not provide products to any entity or individual included in the restricted lists by international or domestic regulatory authorities.
3. lf you resell products to downstream customers, you are obligated to ensure that they make compliance commitments consistent with the core terms of this statement.

Liability and Consequences of Breach

You fully understand that if you breach the aforementioned commitments(including false information, illegal use, illegal export, etc.), which results in any investigation, penalty, or loss (including financial compensation, damage to goodwill, etc.) to this platform, you shall bear full compensation liability.
Meanwhile, the platform reserves the right to immediately suspend or terminate the provision of services to you and pursue your liability for breach of contract in accordance with the law.
The validity of this statement is independent and shall not become invalid by the completion of any transaction between you and the platform.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.