CUAV News

C-RTK3 X20P RTK: Manual, Firmware & Parameters FAQ The C-RTK3 X20P is an integrated positioning module that combines professional-grade positioning, industrial-grade attitude awareness, and multi-layer

X25 MEGA Controller: Wiring, ArduPilot & PX4 Guide X25 MEGA is an industrial-grade, high-precision intelligent controller built for civilian unmanned systems. It features a 480MHz

Tutorial for the First Flight of a Multi-rotor Aircraft -Ⅰ Introduction to Flight Mode This article provides an overview of the flight modes of multi-rotor

Initial Setup of a Multi-Rotor Aircraft -Ⅲ Fail-safe ArduPilot firmware includes built-in safety mechanisms designed to reduce the risk of incidents such as aircraft loss

Initial Setup of a Multi-Rotor Aircraft -Ⅱ Assembling a multi-rotor drone To assemble a multi-rotor drone, you must at least complete the following steps: Load

Initial Setup of a Multi-Rotor Aircraft -Ⅰ Introduction to Types of Multirotor Aircraft APM: Copter supports two main types of aircraft—multirotors and helicopters; this section

CAN PDB User Manual for PX4 and ArduPilot Systems CAN PDB is a controller carrier board developed by CUAV, integrating a power distribution board, Dronecan

PMU 2 Lite: Features, Pinout and PX4‑ArduPilot Configuration PMU 2 Lite is a high-precision power management module designed for unmanned systems. Its core advantages lie

C‑RID Module: Hardware, Wiring, Config & Firmware Guide C-RID is a remote ID broadcasting module independently developed and manufactured by CUAV. It supports broadcasting drone

C-COMPASS: PX4 & ArduPilot User Guide C-Compass is a high-performance industrial anti-interference electronic compass; it integrates a vehicle-grade RM3100 electronic compass and supports the DroneCAN

SKYE 2 Nano: ArduPilot & PX4 User Setup Guide  Note SKYE 2 Nano does not have a heater function. Feature The DLVR airspeed sensor using